KALMATRON® KF-ECOAT
KALMATRON® KF-EHARD
KALMATRON® KF-EADMIX
COMPOSITIONS FOR WATERPROOFING AND ADDING COLORFUL DECORATIVE APPEAL TO ANY BUILDING MATERIAL OR STRUCTURE. KF-E is available as both an ADMIXTURE AND COATING.
KF-E is ideal for the restoration and preservation of buildings, historic structures, sculptures and architectural/ornamental details. KF-E is well-suited for damp, aged structures that are otherwise irreparable. KF-E strengthens cracked concrete, providing impermeability and highest resistance to rusting. Stops deterioration.
ADVANTAGES OF COATING KF-E-coat
KF-E-coat is a coating for concrete, masonry and stucco surfaces. KF-E-coat adds beautiful, permanent color for visual appeal and increases compressive strength, impermeability to liquids and corrosion resistance. No cracks, non-fading, non-dusting permanent colors.
- Simplest surface preparation---just wet the surface with water
- Applicable under low temperature on site
- No specific qualification of staff is required
- No costly removal and replacement of the deteriorated structure-just restore it
- Impermeability to wall seepage is 100%
ADVANTAGES OF HARDENER KF-E-hard
KF-E-hard is a coating on fresh concrete, masonry and stucco surfaces. KF-E-hard adds color for visual appeal, provides curing and increases compressive strength, impermeability to liquids and corrosion resistance.
- Non-Rusting - Stain-Resistant
- Permanent color - non-fading
- Cures the fresh concrete surface
- Unlimited variety of finishes and colors are possible
- Increases serviceability of concrete floors
ADVANTAGES OF ADMIXTURE KF-E-admix
KF-E-admix is an admixture to concrete, mortar and stucco mixes. KF-E-admix increases compressive strength, impermeability to liquids and corrosion resistance, with 2-3 times lower shrinkage. There are no cracks, flaking or sliding. Stable, permanent color will not fade.
- The water-cement ratio is standard or lower by up to 10%
- The mixing time is standard and the viscosity of the mix is much better
- Slump is higher by up to 20% without additional water
- Shrinkage is lower by up to 35%
- Impermeability of structure is 100%
KF-E IS A MULTI-FACETED COMPOSITION THAT GUARANTEES YOU REAL SAVINGS OF AS MUCH AS 45% OR MORE ON REPAIRS OF:
GARAGE FLOORS, SIDEWALKS, CURBS & GUTTERS, FOUNDATIONS, ROOFS, PLASTERING, FENCES, STREET & ROAD SLABS, SWIMMING POOLS, TUNNELS, SEWAGE & PETROLEUM TANKS, GAS STATIONS, BRIDGE DECKS & PILLARS...AND MUCH MORE.
